SwedeSpeed - Volvo Performance Forum banner

rear rotors

2K views 4 replies 4 participants last post by  kenhoeve 
#1 ·
I carefully removed rear wheels and taped off braking surface with pinstripe tape and painted outer surface of rotors and where the vents exit at hub. Also tape off backing plates with wide tape..turned out perfect and look so much better. Here in Canada I use dupli color graphite high performance wheel paint p.n. 10200 and it is amazing paint almost like powder coating...drys in minutes and matches perfect and has metallic sparkle as well. Torqued all wheels to spec and lowered air to 36psi to try..love my car..
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top