SwedeSpeed - Volvo Performance Forum banner

Throttle Cable Linkage Adjustment?

812 views 2 replies 2 participants last post by  dnvolvo 
#1 ·
Throttle Cable Linkage adjustment. 760 or 240

Is the Throttle Linkage supposed to be adjusted such that there is a 1mm space (remaining) between the idle stop and cable drum -- when adjustment completed? Or is the drum supposed to rest on the idle stop when completed?

Thanks!
dnvolvo
 
#3 ·
Re: Throttle Cable Linkage Adjustment? (Three Fat Tigers)

Thank you! I went ahead and readjusted the Throttle Wheel and this time did it correctly. The spool now rests at the idle stop and when open by 1mm (feeler guage) lifts the cam by about .1mm off the screw stop. The car is idling much nicer now!!

Thans again for your response!!

dnvolvo
'89 760 - '91 240
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top