SwedeSpeed - Volvo Performance Forum banner

Are valve cover studs threaded into the head or machine pressed on 740's?

655 views 1 reply 2 participants last post by  gdill2 
#1 ·
HELP!!!!!!!


As usual, I have managed to break another bolt .......I need to know how Volvo valve cover studs are attached to the cylinder head. I have over half of the stud left in the head and can machine a "special" nut to correct the problem.....However, I would rather replace the stud if it can be easily removed.

Modified by harleyplug at 7:25 PM 2-10-2005
 
See less See more
1
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top