I've never been over on this part of the forum, but thought I would share how to program a remote control I read over on another forum. This is for a '98 S90:
1. open the car and get inside, making sure to close all doors, hood and trunk;
2. Turn the ignition on and off 5 times (don't turn the car fully on.. only to the 2nd ignition switch position);
3. On the 5th ignition turn, hold down the lock button for a few seconds;
4. Start the car for about 20 seconds, then turn off;
5. Test the remote.
Actually this is the same as on an 850.
If this helps someone great. If it doesn't or it's already well known, I'm sorry.
MIJ
1. open the car and get inside, making sure to close all doors, hood and trunk;
2. Turn the ignition on and off 5 times (don't turn the car fully on.. only to the 2nd ignition switch position);
3. On the 5th ignition turn, hold down the lock button for a few seconds;
4. Start the car for about 20 seconds, then turn off;
5. Test the remote.
Actually this is the same as on an 850.
If this helps someone great. If it doesn't or it's already well known, I'm sorry.
MIJ