SwedeSpeed - Volvo Performance Forum banner

B30A Cam Grind Specs & Manifold Wanted

2K views 5 replies 4 participants last post by  RisqMan 
#1 ·
I'm looking for a street/strip cam grind for my B30A (1970 164) project, along with a Manifold since my manifold has a 2 inch crack in it!
Any help would be great,
Thanks!
-John
 
#4 ·
Re: B30A Cam Grind Specs & Manifold Wanted (Leopold Porkstacker)

I wasn't scared off, after all the title is "Swedespeed"- not "Turbo-Swedespeed"!
After all, there is a 164 at the top of the page!
So I do believe this is the correct board to ask around!
I have done alot of Googling & Altavisting etc., but the only good links I come up with are dead now... If I don't come up with something in the next week or so I'll have to make a choice of some old B20 Isky grinds that
I'm not really sure what will happen.
The B20 (performance) grind doesn't seem to take advantage of the B30's
natural Torque curve, I'll have to do some talking to my Cam grinder about a better choice.

[Modified by RisqMan, 6:54 AM 3-31-2003]
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top