Type: Posts; User: opelrick
PM me when you get approved
Austin , the west coast Dougy ....;)
Are the Sport seats the same bolsters as R seats with "normal" leather ? (sorry to make you display the full depth of your knowledge ;))
What does the Sport interior entail?
What is your reported fuel pressure range while driving / idling ?
not to be that guy, but those are bolts ...
Seriously, WTF !? :angryfire: I am in Madison, LMK if I can be of any assistance. Actually, shoot me a PM when you see this.
Did you ever come up with a solution for this ?
PM sent (yesterday)
When you say that you reset all the adaptations , do you mean that you cleared the values and then ran the recalibration process (initiate in VIDA, drive at xxxx rpm until you get a flashing light,...
I can vouch for Matty Moo at Midwest ABS when it comes to P80 modules - a most awesome guy to work with- BUT, I'm not sure if he does P2 modules, Please post back ans let us know what he says.
there are gaskets available, BUT if your cover (also called a pan by transmission people) is warped or scratched , you might have issues getting a good seal.
Hey Phoenix, good job picking up on that clue. Of course if you are as clever as you think , you might also realize that a cracked cylinder will over-pressurize the coolant system, which will then...
any intermittent misfires when starting ?
Thanks, That's what I was thinking, but I'm concerned about cracking the casting. Anyone else care to weigh in ?
For those of you who have replaced the pinon shaft bearings and seal : Will this flat spot in the underside of the housing cause problems with replacing the seal and with leaks after replacement ?
from VIDA for my 06 R
"Clearance between new components: Inlet/Exhaust: 0.03 - 0.05 mm" [lift the valve 2-3 mm from the seat when carrying out the check]
max play for used listed as .15mm
see 3:55- 5:00, 10:45-12:30, pretty easy
Any thoughts/comments on Xmat products ?
The light function settings can be adjusted with VIDA. Sounds like they might be stored in the CEM, and that your replacement CEM had different light settings then your original unit.
Just a suggestion :
What dashcam setup do you have, your footage seems batter than most ?
ouch!, nice rundown, turning radius strikes again ....
In for a set
still looking ?
Just confirming this was a one of the new AW bodies from Cobra Transmissions ? within the last year or two ? Any issues or simple plug and play ?