SwedeSpeed - Volvo Performance Forum banner

XC60 T6 Front brake caliper and bracket torque specs

7K views 1 reply 2 participants last post by  ironmike 
#1 ·
Hi. New member from Norway (in Europe) here.

Getting ready to replace front rotors and pads on our 2010 XC60 T6 AWD US-spec.

I need the torque specs for the front caliper glide pins as well as the bracket bolts.
 
#2 ·
Does seem to be a mystery for our cars eh? (2012 XC60 T6). I followed the XC90 specs I found online, which IIRC was around 80 ft/lbs for bracket bolts and 30 ft/lbs for "pins" which the caliper slides on. Mine were 9mm hex btw, a lot of misinformation about this bit also!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top