Synapse Synchronic Diverter Valve DV Kit BOV- Brand New =130$ shipped
Username
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    Results 1 to 23 of 23
    1. #1
      Member
      Join Date
      Jun 2011
      Location
      Congo
      Posts
      8,997

      Synapse Synchronic Diverter Valve DV Kit BOV- Brand New =130$ shipped

      Genuine Brand New in box Synapse Synchronic Diverter Valve DV Kit BOV 16506A - it is Brand New / sealed = 130$ shipped within United States of America.



      Last edited by dougy; 10-13-2015 at 02:03 PM.
      2006 S60R 2.4 T5 mostly stock fine tuned by https://urbastuning.wordpress.com
      ipd = sways, inter-cooler, inlet/TB/OTE silicone piping, cat back exhaust, rear camber bushings, sub-frame inserts,
      Originally Posted by John C "We are in the presence of greatness! "

    2. Remove Advertisements

      Advertisements
       

    3. #2
      Member
      Join Date
      Jun 2011
      Location
      Congo
      Posts
      8,997
      bump...i have 1" fitting or 1.25" fitting and weld on bung


      i use same one on my R ...works perfect!

      2006 S60R 2.4 T5 mostly stock fine tuned by https://urbastuning.wordpress.com
      ipd = sways, inter-cooler, inlet/TB/OTE silicone piping, cat back exhaust, rear camber bushings, sub-frame inserts,
      Originally Posted by John C "We are in the presence of greatness! "

    4. #3
      Moderator MvI_S60R's Avatar
      Join Date
      Nov 2013
      Location
      Stow, OH
      Posts
      2,394
      Dougy check your PMs I need this thing ASAP
      06 S60R M66 | Blurple w/Sport Kit | 19" FC04A's | KW V2 | Hilton Stage 2.25 | DevilsOwn W/M | IPD:3" Oval Catless Exhaust | HD CA's | Adj. Toe Bars | 28mm Rear Sway | Snabb: Turbo Intake | Airbox | Big FMIC | Synapse DV | Colder Plugs | Strut Brace | Delrin S.B.'s | 20mm Spacers | 90mm Studs | Fancy Rotors | A-Pillar Boost/Trans/Volt Gauges | ScanGauge II | All Lights HID | My BUILD THREAD

    5. Remove Advertisements
      SwedeSpeed.com
      Advertisements
       

    6. #4
      Member
      Join Date
      Jun 2011
      Location
      Congo
      Posts
      8,997
      i can send you pretty much any combo you want for 130$ shipped... 1' and 1' outlets ...1.25' and 1.25' or 1' and weld on bung ..ect...ect...ect.

      same as this or that.

      http://www.ebay.com/itm/Synapse-Sync...ZXFHAb&vxp=mtr

      http://www.ebay.com/itm/Synapse-Sync...LDg2Zw&vxp=mtr

      http://www.ebay.com/itm/Synapse-Sync...UnUjgA&vxp=mtr
      2006 S60R 2.4 T5 mostly stock fine tuned by https://urbastuning.wordpress.com
      ipd = sways, inter-cooler, inlet/TB/OTE silicone piping, cat back exhaust, rear camber bushings, sub-frame inserts,
      Originally Posted by John C "We are in the presence of greatness! "

    7. #5
      Member
      Join Date
      Nov 2008
      Location
      Los Angeles
      Posts
      1,102
      bump for great price and fast shipping,I got one from Dougy a few months back
      15.5 V60 P* Rebel Blue( regrettable Sold) 07 S60R Titanium/Nordcap GT 4T5 Engine 07 S60R Silver/Gobi GT 07 S60R Titanium/Nordkap Gt 06 V70R M66 Titanium/Gobi IPD 4T4. 06V70R Electric silver/Nordkap GT(sold). 06 V70R Sonic/Nordkap M66 (sold and missed)98 S70 T5M Black/Black (Sold and missed)06 V70r GT Passion Red/Atacama(sold) 06 V70R GT Sonic/Gobi(sold and missed)98 S70 T5mRed/Black (sold and missed) 88 740 Turbo(Totaled) 89 780 Turbo(sold) 99 S70 N/A(sold) 98 V70 T5 Silver (sold)13 S60 T6 AWD R-Design White(leased and returned)

    8. #6
      Junior Member good4y0u's Avatar
      Join Date
      Jan 2015
      Location
      NJ
      Posts
      699
      what size do i need for the 04 s60R.
      2004 Volvo S60R M66, http://imgur.com/bkyJ9HY Gobi. Snabb intake pipe, IPD engine mount, intercooler, 3" catback, Magnaflow resonator and muffler, Phuzzy DP, Synapse DV, Snabb OTE charge pipe
      [Sold] 2004 Volvo S60T AWD Side: http://imgur.com/2rM2Lex
      My Build Thread

    9. #7
      Member
      Join Date
      Jun 2011
      Location
      Congo
      Posts
      8,997
      Quote Originally Posted by good4y0u View Post
      what size do i need for the 04 s60R.
      i am running 1" inch fittings ... some big boyz run 1.25" that's why i have that option...the weld on bung is 1.25...more work/tighter to make it work.
      2006 S60R 2.4 T5 mostly stock fine tuned by https://urbastuning.wordpress.com
      ipd = sways, inter-cooler, inlet/TB/OTE silicone piping, cat back exhaust, rear camber bushings, sub-frame inserts,
      Originally Posted by John C "We are in the presence of greatness! "

    10. #8
      Junior Member good4y0u's Avatar
      Join Date
      Jan 2015
      Location
      NJ
      Posts
      699
      Quote Originally Posted by dougy View Post
      i am running 1" inch fittings ... some big boyz run 1.25" that's why i have that option...the weld on bung is 1.25...more work/tighter to make it work.
      whats the positive to using the 1.25 vs 1?
      2004 Volvo S60R M66, http://imgur.com/bkyJ9HY Gobi. Snabb intake pipe, IPD engine mount, intercooler, 3" catback, Magnaflow resonator and muffler, Phuzzy DP, Synapse DV, Snabb OTE charge pipe
      [Sold] 2004 Volvo S60T AWD Side: http://imgur.com/2rM2Lex
      My Build Thread

    11. #9
      Member
      Join Date
      Jun 2011
      Location
      Congo
      Posts
      8,997
      If you plan high hp built bigger would be better to release. ..i'm at 400 awhp and 1 inch is just fine.

      bump
      2006 S60R 2.4 T5 mostly stock fine tuned by https://urbastuning.wordpress.com
      ipd = sways, inter-cooler, inlet/TB/OTE silicone piping, cat back exhaust, rear camber bushings, sub-frame inserts,
      Originally Posted by John C "We are in the presence of greatness! "

    12. #10
      Member
      Join Date
      Nov 2013
      Location
      Louisville, Ky
      Posts
      2,045

      Synapse Synchronic Diverter Valve DV Kit BOV- Brand New =130$ shipped

      Will the port fit on he 25mm ipd charge pipe and then be able to weld a bung onto the intake pipe?


      Sent from my iPhone using Tapatalk
      04 S60R, M66, Titanium, Nordcap, Sport Kit, NAV, Pioneer Double Din, Hilton Stage 3 Tune, Viva Hybrid Turbo, Snow Performance Stage 3 Methanol Injection, Five O Motorsports 750cc Injectors, Aeromotive Fuel Pump, Audi RS4 MAF, IPD catback, OBX Catless DP- custome electric dump welded in, Custom FMIC with Sabb piping, Snabb Intake, Forge CBV, iPd OTE, Silicone Rad Hoses, BC Coilovers, iPd/ Elevate Sway Bars, Etc... Just ask

    13. #11
      Member
      Join Date
      Jun 2011
      Location
      Congo
      Posts
      8,997
      Quote Originally Posted by adsinnott1 View Post
      Will the port fit on he 25mm ipd charge pipe and then be able to weld a bung onto the intake pipe?


      Sent from my iPhone using Tapatalk
      yes it will , just let me know you want 25mm fitting and a weld on bung.
      2006 S60R 2.4 T5 mostly stock fine tuned by https://urbastuning.wordpress.com
      ipd = sways, inter-cooler, inlet/TB/OTE silicone piping, cat back exhaust, rear camber bushings, sub-frame inserts,
      Originally Posted by John C "We are in the presence of greatness! "

    14. #12
      Member
      Join Date
      Nov 2013
      Location
      Louisville, Ky
      Posts
      2,045
      Quote Originally Posted by dougy View Post
      yes it will , just let me know you want 25mm fitting and a weld on bung.
      So it will be 1in in 1in out and a 1in aluminum bung?


      Sent from my iPhone using Tapatalk
      04 S60R, M66, Titanium, Nordcap, Sport Kit, NAV, Pioneer Double Din, Hilton Stage 3 Tune, Viva Hybrid Turbo, Snow Performance Stage 3 Methanol Injection, Five O Motorsports 750cc Injectors, Aeromotive Fuel Pump, Audi RS4 MAF, IPD catback, OBX Catless DP- custome electric dump welded in, Custom FMIC with Sabb piping, Snabb Intake, Forge CBV, iPd OTE, Silicone Rad Hoses, BC Coilovers, iPd/ Elevate Sway Bars, Etc... Just ask

    15. #13
      Member
      Join Date
      Jun 2011
      Location
      Congo
      Posts
      8,997
      Quote Originally Posted by adsinnott1 View Post
      So it will be 1in in 1in out and a 1in aluminum bung?


      Sent from my iPhone using Tapatalk
      the valve comes with two fittings...1" in and 1" out or 1" out and weld on bung , you can do the same combo in 1.25" ...weld on bung comes in only in 1.25"...if you like any additional fittings add 15$ and you can have more options.
      2006 S60R 2.4 T5 mostly stock fine tuned by https://urbastuning.wordpress.com
      ipd = sways, inter-cooler, inlet/TB/OTE silicone piping, cat back exhaust, rear camber bushings, sub-frame inserts,
      Originally Posted by John C "We are in the presence of greatness! "

    16. #14
      Member
      Join Date
      Nov 2013
      Location
      Louisville, Ky
      Posts
      2,045
      Quote Originally Posted by dougy View Post
      the valve comes with two fittings...1" in and 1" out or 1" out and weld on bung , you can do the same combo in 1.25" ...weld on bung comes in only in 1.25"...if you like any additional fittings add 15$ and you can have more options.
      Sweet. I just need 1" in and 1" out then I will source a 1" aluminum bung to weld on my intake pipe. I will be in contact here in a couple days


      Sent from my iPhone using Tapatalk
      04 S60R, M66, Titanium, Nordcap, Sport Kit, NAV, Pioneer Double Din, Hilton Stage 3 Tune, Viva Hybrid Turbo, Snow Performance Stage 3 Methanol Injection, Five O Motorsports 750cc Injectors, Aeromotive Fuel Pump, Audi RS4 MAF, IPD catback, OBX Catless DP- custome electric dump welded in, Custom FMIC with Sabb piping, Snabb Intake, Forge CBV, iPd OTE, Silicone Rad Hoses, BC Coilovers, iPd/ Elevate Sway Bars, Etc... Just ask

    17. #15
      Member
      Join Date
      Jun 2011
      Location
      Congo
      Posts
      8,997
      bump
      2006 S60R 2.4 T5 mostly stock fine tuned by https://urbastuning.wordpress.com
      ipd = sways, inter-cooler, inlet/TB/OTE silicone piping, cat back exhaust, rear camber bushings, sub-frame inserts,
      Originally Posted by John C "We are in the presence of greatness! "

    18. #16
      Junior Member
      Join Date
      Jun 2017
      Location
      Louisville, Kentucky
      Posts
      175
      So.... What exactly is this... I hear BOV, but.. What else

      Sent from my XT1575 using Tapatalk
      2012 Volvo S60 R-Design Fully loaded and loving it!

    19. #17
      Member
      Join Date
      Jun 2011
      Location
      Congo
      Posts
      8,997
      A compressor bypass valve (CBV), also known as a pressure relief valve or diverter valve, is a manifold vacuum-actuated valve designed to release pressure in the intake system of a turbocharged vehicle when the throttle is lifted or closed. This Diverter Valve recirculates the air back into the intake system piping instead of blowing into the air but if you like It can be used as a BOV.
      2006 S60R 2.4 T5 mostly stock fine tuned by https://urbastuning.wordpress.com
      ipd = sways, inter-cooler, inlet/TB/OTE silicone piping, cat back exhaust, rear camber bushings, sub-frame inserts,
      Originally Posted by John C "We are in the presence of greatness! "

    20. #18
      Junior Member good4y0u's Avatar
      Join Date
      Jan 2015
      Location
      NJ
      Posts
      699
      I bought one, they really are great ! Dougy is really helpful too. I use it on my Snabb charge pipe.

      Sent from my PH-1 using Tapatalk
      2004 Volvo S60R M66, http://imgur.com/bkyJ9HY Gobi. Snabb intake pipe, IPD engine mount, intercooler, 3" catback, Magnaflow resonator and muffler, Phuzzy DP, Synapse DV, Snabb OTE charge pipe
      [Sold] 2004 Volvo S60T AWD Side: http://imgur.com/2rM2Lex
      My Build Thread

    21. #19
      Member
      Join Date
      Jun 2011
      Location
      Congo
      Posts
      8,997
      Quote Originally Posted by good4y0u View Post
      I bought one, they really are great ! Dougy is really helpful too. I use it on my Snabb charge pipe.

      Sent from my PH-1 using Tapatalk

      thanks, I appreciate it brotha.
      2006 S60R 2.4 T5 mostly stock fine tuned by https://urbastuning.wordpress.com
      ipd = sways, inter-cooler, inlet/TB/OTE silicone piping, cat back exhaust, rear camber bushings, sub-frame inserts,
      Originally Posted by John C "We are in the presence of greatness! "

    22. #20
      Member
      Join Date
      Jun 2011
      Location
      Congo
      Posts
      8,997
      up...still have couple
      2006 S60R 2.4 T5 mostly stock fine tuned by https://urbastuning.wordpress.com
      ipd = sways, inter-cooler, inlet/TB/OTE silicone piping, cat back exhaust, rear camber bushings, sub-frame inserts,
      Originally Posted by John C "We are in the presence of greatness! "

    23. #21
      Junior Member
      Join Date
      Mar 2018
      Posts
      3
      Still have a 1" available with the weld bung and adapter fitting to the bung?

    24. #22
      Member
      Join Date
      Jun 2011
      Location
      Congo
      Posts
      8,997
      Quote Originally Posted by Greg Trappe View Post
      Still have a 1" available with the weld bung and adapter fitting to the bung?
      yes i do.
      2006 S60R 2.4 T5 mostly stock fine tuned by https://urbastuning.wordpress.com
      ipd = sways, inter-cooler, inlet/TB/OTE silicone piping, cat back exhaust, rear camber bushings, sub-frame inserts,
      Originally Posted by John C "We are in the presence of greatness! "

    25. #23
      Member
      Join Date
      Jun 2011
      Location
      Congo
      Posts
      8,997
      bump
      2006 S60R 2.4 T5 mostly stock fine tuned by https://urbastuning.wordpress.com
      ipd = sways, inter-cooler, inlet/TB/OTE silicone piping, cat back exhaust, rear camber bushings, sub-frame inserts,
      Originally Posted by John C "We are in the presence of greatness! "

    26. Remove Advertisements

      Advertisements