Evap Hose
Username
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    Results 1 to 15 of 15

    Thread: Evap Hose

    1. #1
      Junior Member
      Join Date
      Feb 2015
      Location
      Near the pimple on Philadelphia's ass
      Posts
      833

      Evap Hose

      Nope not the J hose. This one is the one that comes off the top center bubble port on the intake manifold.All our favorites parts suppliers sell a 3 hose pre assembled unit with the carbon check valves included.Part # is 1270480.They sell for around $100.Through a search on here the primary hose that plugs into the manifold is 12mm OD X 7MM ID.Is this correct? Will replacement fuel line or silicon hose kink where it makes a fairly sharp bend downwards? And what about the 2 other hoses.Is there a size difference with those? I am asking here because I don't want to get stuck with not having the right size stuff when I pull it out. Most likely the hoses are going to be really stuck and have to be sliced/cut to pull them off.
      I would rather rebuild the hose set and save some $$$. A hundred bucks is rediculous for 3 vacuum hoses.

      Please respond if you replaced yours.Thanks Guys.

    2. Remove Advertisements

      Advertisements
       

    3. #2
      Junior Member
      Join Date
      Nov 2017
      Posts
      551
      I was told by members to go with 8mm id silicone hose. And got a link below from someone who used it. Reading reviews it's mixed info but I have these at had now waiting to do the same job as you. Wondering if I need new filters or they can be reused



      Universal Inner Diameter High Performance 5 Feet Length Silicone Vacuum Hose Line (8MM(5/16 Inch), Blue) https://www.amazon.com/dp/B00TAGBZFY..._eGWZCbT9WPRW4

      Sent from my ZTE A2017U using Tapatalk

    4. #3
      Member
      Join Date
      Apr 2015
      Location
      So Cal / Inland Empire
      Posts
      2,178
      Is this the hose that comes out from the intake manifold on the drivers side and T's to a couple other hoses? That's the only 3 hose piece I know of. I'll Google up the part number you have to what it is exactly.

      Sent from my Huawei Mate 9 using Tapatalk
      Last edited by Phixion; 05-05-2019 at 01:35 PM.
      2004 S60 2.5T - Stock for now...

    5. Remove Advertisements
      SwedeSpeed.com
      Advertisements
       

    6. #4
      Member
      Join Date
      Apr 2015
      Location
      So Cal / Inland Empire
      Posts
      2,178
      These Rick?? Mine at the intake at least looks like it's seen better days...IMG_20190505_113311.jpgIMG_20190505_113331.jpg

      Sent from my Huawei Mate 9 using Tapatalk
      2004 S60 2.5T - Stock for now...

    7. #5
      Junior Member
      Join Date
      Nov 2017
      Posts
      551
      This I bet. I just officially changed mine with hoses linked earlier... I think we are good as new! It was super easy!

      Sent from my ZTE A2017U using Tapatalk
      Last edited by lotusdoom; 05-05-2019 at 02:51 PM.

    8. #6
      Member
      Join Date
      Apr 2015
      Location
      So Cal / Inland Empire
      Posts
      2,178
      Quote Originally Posted by lotusdoom View Post
      This I bet. I just officially changed mine with hoses linked earlier... I think we are good as new! It was super easy!

      Sent from my ZTE A2017U using Tapatalk
      And with FCP you're set for life on that part!
      So it is sold as a complete set I see. With how brittle plastic gets, might be best to go with the Volvo part...

      Sent from my Huawei Mate 9 using Tapatalk
      2004 S60 2.5T - Stock for now...

    9. #7
      Junior Member
      Join Date
      Nov 2017
      Posts
      551
      Quote Originally Posted by Phixion View Post
      And with FCP you're set for life on that part!
      So it is sold as a complete set I see. With how brittle plastic gets, might be best to go with the Volvo part...

      Sent from my Huawei Mate 9 using Tapatalk
      Read above post, I bought silicone hose to replace! Cheap and should last forever lol

      Sent from my ZTE A2017U using Tapatalk

    10. #8
      Member
      Join Date
      Apr 2015
      Location
      So Cal / Inland Empire
      Posts
      2,178
      Quote Originally Posted by lotusdoom View Post
      Read above post, I bought silicone hose to replace! Cheap and should last forever lol

      Sent from my ZTE A2017U using Tapatalk
      Oh yes I see that. Silicon should outlast the car.

      Sent from my Huawei Mate 9 using Tapatalk
      2004 S60 2.5T - Stock for now...

    11. #9
      Junior Member
      Join Date
      Feb 2015
      Location
      Near the pimple on Philadelphia's ass
      Posts
      833
      Yes guys and many thanks Basically the same part but my chassis # is later and calls for 1270480.So both parts look identical.I wonder if there is a ID size difference though? Nice pics Matt! You nailed what I was talking about.

      Thanks Lotusdoom! did you have any issue with kinking the hose where it plugs into the intake?

    12. #10
      Member beachnut's Avatar
      Join Date
      Jan 2004
      Location
      SW Florida
      Posts
      2,057
      There's another thread here (pcv catastrophe) and this is the hose that is split in his car. Indeed, a split/torn hose here will cause all sorts of running issues and codes. I split mine a couple years ago on the S80 when doing the pcv but didn't have a large enough diameter silicon hose in my stash so ended up using something else, a thicker fuel line that I had I think. It's my daughter's car now and really don't need that phone call while she's on her way to work lol. If you guys figure out the correct size silicon I'd like to know since I probably need to go back and re-do this on her car. The key is getting it to fit on the check valves. My son's S60 is due for a pcv job soon and I might as well re-do his evap hose too while I'm in there.
      2015.5 XC60 T6 Flamenco Red/Sand, Platinum, Tech, Blis
      2010 S80 T6 Silver/Anthracite, Dynaudio, Nav, Climate, Blis
      2005 S40 T5 Passion Red/Quartz, Dynamic Pkg, E46 bi-xenon retro
      Previous: '05 S60 2.5T, '05 S60 T5, '04 S80 2.5T, '98 V70 T5, '96 854 Platinum

    13. #11
      Member
      Join Date
      Apr 2015
      Location
      So Cal / Inland Empire
      Posts
      2,178
      I too am curious as well as I'd totally be in for doing this. Curious on if the check valves need any replacing though as inquired above... And if so, is there a cost effective but reliable alternative that can be used in place to complete this? Lastly, the OEM piece is currently $81 on Tasca...
      2004 S60 2.5T - Stock for now...

    14. #12
      Senior Member ScottishBrick's Avatar
      Join Date
      Dec 2014
      Location
      Connecticut
      Posts
      15,838
      Quote Originally Posted by Phixion View Post
      I too am curious as well as I'd totally be in for doing this. Curious on if the check valves need any replacing though as inquired above... And if so, is there a cost effective but reliable alternative that can be used in place to complete this? Lastly, the OEM piece is currently $81 on Tasca...
      The only current source of the check valves is from the VAG parts bin. At the price the commend this full assembly is like getting free Volvo vacuum hose.


      Sent from my iPhone using Tapatalk
      2003 V70 T5 - Mystic/Graphite - M56LK - 211k - K24/Greens/Do88/Quaife/SMF/P2R Clutch/DW300C/H&R/Bilstein TC/316mm & 308mm Brakes - SteveO Tuned
      1999 V70 T5 - Pewter/R Graphite & Alcantara - AW42 - 305k - Daily/Work Wagon
      1999 V70 T5 - Nautic/R Graphite & Alcantara - M56H - 177k - Rescued
      1999 V70 T5 - Emerald/Graphite - M56H - 119k - Garage Queen
      2000 V70 T5 - Mystic/Graphite - AW42 - 246k - Moms Unicorn
      2000 S70 GLT SE- Mystic/Graphite - AW42 - 218k - Sisters

    15. #13
      Junior Member
      Join Date
      Feb 2015
      Location
      Near the pimple on Philadelphia's ass
      Posts
      833
      Quote Originally Posted by ScottishBrick View Post
      The only current source of the check valves is from the VAG parts bin. At the price the commend this full assembly is like getting free Volvo vacuum hose.


      Sent from my iPhone using Tapatalk
      I couldn't find Vag parts bin.Can you give me a link? Please and thanks.

    16. #14
      Senior Member ScottishBrick's Avatar
      Join Date
      Dec 2014
      Location
      Connecticut
      Posts
      15,838
      Quote Originally Posted by chefricky View Post
      I couldn't find Vag parts bin.Can you give me a link? Please and thanks.
      Not a literal place I mean it’s also a Volkswagen Audi group part.


      Sent from my iPhone using Tapatalk
      2003 V70 T5 - Mystic/Graphite - M56LK - 211k - K24/Greens/Do88/Quaife/SMF/P2R Clutch/DW300C/H&R/Bilstein TC/316mm & 308mm Brakes - SteveO Tuned
      1999 V70 T5 - Pewter/R Graphite & Alcantara - AW42 - 305k - Daily/Work Wagon
      1999 V70 T5 - Nautic/R Graphite & Alcantara - M56H - 177k - Rescued
      1999 V70 T5 - Emerald/Graphite - M56H - 119k - Garage Queen
      2000 V70 T5 - Mystic/Graphite - AW42 - 246k - Moms Unicorn
      2000 S70 GLT SE- Mystic/Graphite - AW42 - 218k - Sisters

    17. #15
      Junior Member
      Join Date
      Jan 2018
      Location
      Long Island, NY
      Posts
      43
      Quote Originally Posted by lotusdoom View Post
      Read above post, I bought silicone hose to replace! Cheap and should last forever lol

      Sent from my ZTE A2017U using Tapatalk
      Thanks, man.... I just noticed my hoses were cracked and sucking air, and couldn't find the size anywhere... I just ordered the silicone hose on amazon.... and probably will use zip ties instead of buying clamps.
      2005 XC90 T5 2.5T AWD 110K

    18. Remove Advertisements

      Advertisements
       

    Similar Threads

    1. 2002 Volvo s40 evap canister j-hose location
      By Newport_j in forum General FWD & AWD
      Replies: 0
      Last Post: 08-09-2017, 02:34 PM
    2. Common AWD Evap hose failure @ Filler Neck area?
      By burnout8488 in forum S70, V70 & V70XC (1998-2000)
      Replies: 4
      Last Post: 06-14-2013, 04:08 PM
    3. Evap canister hose size and difficulty?
      By derosa in forum S70, V70 & V70XC (1998-2000)
      Replies: 0
      Last Post: 01-05-2011, 06:09 PM
    4. Replies: 4
      Last Post: 09-28-2004, 07:28 AM