Tomahawk replacement
Username
Do you already have an account?
Forgot your password?
  • Log in or Sign up

    Results 1 to 11 of 11
    \r\n
    \r\n
    \r\n
    \r\n \r\n \n
    \r\n apico500\r\n \r\n
    \n\r\n \napico500 is offline\r\n\n\r\n \r\n
    \r\n \r\n Junior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Jan 2010
    \r\n \r\n \r\n
    Posts
    68
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n

    \r\n window lift rail channel replacement\r\n

    \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n I bought from VP new window lift rail channels and rubber strips to replace my rusty ones in my 142. I removed the old ones but the new one fits very loosely and wont hold the window. is there something else I need to do? I think the rubber strip may be too thin. Thank you\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n \r\n \r\n
    \r\n \r\n Last edited by apico500; 06-14-2019 at 10:31 AM.\r\n \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n\r\n\r\n\r\n \r\n\n\n'; pd[7339269] = '\n\n\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #2\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \n
    \r\n 142 Guy\r\n \r\n
    \n\r\n \n142 Guy is offline\r\n\n\r\n \r\n
    \r\n \r\n Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    May 2013
    \r\n
    Location
    Saskatchewan, Canada
    \r\n \r\n
    Posts
    2,178
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Lift rails - I assume parts #55 and 56?
    \r\n
    \r\nWindow regulator.JPG
    \r\n
    \r\nIf so, I can\'t help on the replacements because mine are original and I never removed them from the glass when I did the restomod because they were well stuck on. Thinking back, they were so well fixed I assumed at the time that they might have been glued.
    \r\n
    \r\n I suggest measuring the channel opening on the metal piece and comparing it to your original. If they match then you have confirmed that the rubber insert is the problem. If the metal channel measures out too wide, then perhaps the channel has to be crimped a bit to create a tight fit.\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    A 142 of course. What do you expect? I\'m the 142 guy. / 1971 142 E 102 color
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n\r\n\r\n \r\n\n\n'; pd[7339273] = '\n\n\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #3\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \n
    \r\n apico500\r\n \r\n
    \n\r\n \napico500 is offline\r\n\n\r\n \r\n
    \r\n \r\n Junior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Jan 2010
    \r\n \r\n \r\n
    Posts
    68
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n Quote Originally Posted by 142 Guy\r\n View Post\r\n
    \r\n
    Lift rails - I assume parts #55 and 56?
    \r\n
    \r\nWindow regulator.JPG
    \r\n
    \r\nIf so, I can\'t help on the replacements because mine are original and I never removed them from the glass when I did the restomod because they were well stuck on. Thinking back, they were so well fixed I assumed at the time that they might have been glued.
    \r\n
    \r\n I suggest measuring the channel opening on the metal piece and comparing it to your original. If they match then you have confirmed that the rubber insert is the problem. If the metal channel measures out too wide, then perhaps the channel has to be crimped a bit to create a tight fit.
    \r\n \r\n
    \r\n
    \r\n
    \nSomeone in Turbobricks suggested doubling up with inner tubing\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n\r\n\r\n \r\n \r\n
  • \r\n
    \r\n \r\n Remove Advertisements\r\n
    \r\n
    \r\n
    \r\n
    \r\n
    \r\n SwedeSpeed.com\r\n
    Advertisements\r\n
    \r\n
    \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n
    \r\n
    \r\n
    \r\n
     
    \r\n
    \r\n
  • \r\n \r\n \r\n\n\n'; pd[7339279] = '\n\n\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #4\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \n
    \r\n apico500\r\n \r\n
    \n\r\n \napico500 is offline\r\n\n\r\n \r\n
    \r\n \r\n Junior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Jan 2010
    \r\n \r\n \r\n
    Posts
    68
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n Quote Originally Posted by 142 Guy\r\n View Post\r\n
    \r\n
    Lift rails - I assume parts #55 and 56?
    \r\n
    \r\nWindow regulator.JPG
    \r\n
    \r\nIf so, I can\'t help on the replacements because mine are original and I never removed them from the glass when I did the restomod because they were well stuck on. Thinking back, they were so well fixed I assumed at the time that they might have been glued.
    \r\n
    \r\n I suggest measuring the channel opening on the metal piece and comparing it to your original. If they match then you have confirmed that the rubber insert is the problem. If the metal channel measures out too wide, then perhaps the channel has to be crimped a bit to create a tight fit.
    \r\n \r\n
    \r\n
    \r\n
    \nYes 55 and 56. Also I cant measure the old channel for it is swollen from the rust.\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n\r\n\r\n \r\n\n\n'; pd[7339349] = '\n\n\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #5\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \n
    \r\n apico500\r\n \r\n
    \n\r\n \napico500 is offline\r\n\n\r\n \r\n
    \r\n \r\n Junior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Jan 2010
    \r\n \r\n \r\n
    Posts
    68
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Mystery solved. VP sells two different thickness of the rubber strip but unfortunately only list the thinner one under 140. How are you supposed to know that?\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n\r\n\r\n \r\n\n\n'; pd[7339493] = '\n\n\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #6\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \n
    \r\n 142 Guy\r\n \r\n
    \n\r\n \n142 Guy is offline\r\n\n\r\n \r\n
    \r\n \r\n Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    May 2013
    \r\n
    Location
    Saskatchewan, Canada
    \r\n \r\n
    Posts
    2,178
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n So, I had to go look.
    \r\n
    \r\nVP lists part # 320551 as the filler strip for the 140 under the door components page. That is not the part number that is in the Volvo parts manual. The filler strip for the 140 front door in the parts manual for the 140 models up to 1972 is part number 96343 which VP lists for the Volvo 544/210/122. Clearly their web page for the 140 (and perhaps 544) is in error and I would be inclined to make the point with them that since their web page is in error they should cover the cost of the correct piece and the shipping (and the return shipping on the 320551 part if they want it back).
    \r\n
    \r\nThis is one reason I like having a .pdf copy of the Volvo parts manual. I always find the correct part number first and then search by part number.\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    A 142 of course. What do you expect? I\'m the 142 guy. / 1971 142 E 102 color
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n\r\n\r\n \r\n\n\n'; pd[7341229] = '\n\n\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #7\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \n
    \r\n mathue\r\n \r\n
    \n\r\n \nmathue is offline\r\n\n\r\n \r\n
    \r\n \r\n Junior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n mathue\'s Avatar\r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Feb 2019
    \r\n
    Location
    Dublin CA
    \r\n \r\n
    Posts
    64
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \n
    \r\n
    \r\n
    \r\n
    \r\n \r\n
    \r\n Quote Originally Posted by 142 Guy\r\n View Post\r\n
    \r\n
    So, I had to go look.
    \n
    \nVP lists part # 320551 as the filler strip for the 140 under the door components page. That is not the part number that is in the Volvo parts manual. The filler strip for the 140 front door in the parts manual for the 140 models up to 1972 is part number 96343 which VP lists for the Volvo 544/210/122. Clearly their web page for the 140 (and perhaps 544) is in error and I would be inclined to make the point with them that since their web page is in error they should cover the cost of the correct piece and the shipping (and the return shipping on the 320551 part if they want it back).
    \n
    \nThis is one reason I like having a .pdf copy of the Volvo parts manual. I always find the correct part number first and then search by part number.
    \r\n \r\n
    \r\n
    \r\n
    \n
    \nI love VP, but the maintenance on their sprawling site can be a bit vexing. I don\'t think it\'s deliberate, they just don\'t have enough labour resources to keep ahead of it.
    \n
    \nSeveral months ago when two items listed as in stock turned out to not be in stock I was merely told they don\'t have them, yet they had direct functional equivalents. So I asked do they have those in stock?
    \n
    \nAs an aside I joked "I\'m hoping this won\'t turn into the Monty Python \'Cheese Shop\' sketch." she got the allusion, but instead of getting a chuckle she wrote back in an annoyed tone.
    \n
    \nAhh well. Hopefully, VP will do right by apico500.\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n\r\n\r\n \r\n\n\n'; pd[7342141] = '\n\n\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #8\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \n
    \r\n apico500\r\n \r\n
    \n\r\n \napico500 is offline\r\n\n\r\n \r\n
    \r\n \r\n Junior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Jan 2010
    \r\n \r\n \r\n
    Posts
    68
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n VP agreed to send new filler strips at no cost. They said it was their mistake and will send part # 96343 for the Volvo 544/210/122. However to make it more confusing they also carry part # 1268231 for Volvo 140/164/2/7/900. 142 Guy, how can I download the Volvo parts manual? Also what is the correct grease gun tip for the door hinges?\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n\r\n\r\n \r\n\n\n'; pd[7342351] = '\n\n\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #9\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \n
    \r\n 142 Guy\r\n \r\n
    \n\r\n \n142 Guy is offline\r\n\n\r\n \r\n
    \r\n \r\n Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    May 2013
    \r\n
    Location
    Saskatchewan, Canada
    \r\n \r\n
    Posts
    2,178
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n I got the .pdf parts manuals from the GCP site years ago. They have since changed their site and no longer use the .pdf files - so no longer available. Most of the individual files are smaller than 12 MB, so I can send them to you by email if your email service provider will accept attachments that large. The exception is the file for the body which is over 40 MB and exceeds my file attachment limit.
    \r\n
    \r\nThe other option is that you can set up a Google account for free and that gives you free space on Google Drives. You send me your google ID (I think your gmail name) and an access key and I think I can copy the files to your drive. I think that is how it worked - its been a long time since I used Google Drive.
    \r\n
    \r\nSomething like this is what I use for greasing the pins on the hinges.
    \r\n
    \r\nhttps://www.princessauto.com/en/deta...un/A-p8838666e
    \r\n
    \r\nI know zip about chainsaws so I don\'t know why they call it a chainsaw grease gun. Make sure the area around the fitting on the hinge is clean and take something like a nail and push the little ball in the fitting to make sure it moves. If the grease in the hinge is 40+ years old the pressure from this style gun may not be high enough to push the ball open and the grease just oozes out around the fitting.\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    A 142 of course. What do you expect? I\'m the 142 guy. / 1971 142 E 102 color
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n\r\n\r\n \r\n\n\n'; pd[7342629] = '\n\n\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #10\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \n
    \r\n apico500\r\n \r\n
    \n\r\n \napico500 is offline\r\n\n\r\n \r\n
    \r\n \r\n Junior Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Jan 2010
    \r\n \r\n \r\n
    Posts
    68
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Thank you 142 Guy. I got the Volvo parts manual in pdf format thru a TB member. He PMed me a link and I was able to download it.\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n\r\n\r\n \r\n\n\n'; pd[7371119] = '\n\n\r\n
  • \r\n\r\n\r\n
    \r\n \r\n \r\n \r\n #11\r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n \r\n \n
    \r\n spiked60\r\n \r\n
    \n\r\n \nspiked60 is offline\r\n\n\r\n \r\n
    \r\n \r\n Member\r\n \r\n \r\n \r\n \r\n \r\n \r\n spiked60\'s Avatar\r\n \r\n \r\n \r\n
    \r\n
    \r\n
    Join Date
    Jul 2008
    \r\n
    Location
    Wisconsin
    \r\n \r\n
    Posts
    1,100
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    \r\n
    \r\n
    \r\n \r\n \r\n\r\n\r\n \r\n \r\n
    \r\n
    \r\n
    \r\n Ironically I just did the same on my 164, ordered the arm (tomahawk seems fitting) and didn\'t know about the rubberized gasket.
    \r\n
    \r\nLuckily though mine was extremely tolerant to me using a heat gun and plastic trim tools to remove the window/gasket combo from the broken arm and get seated into the new arm.
    \r\n
    \r\nSo, I lucked out but if I ever have to do it again, will know to order the rubber as well\r\n
    \r\n
    \r\n\r\n \r\n
    \r\n
    \r\n \r\n
    \r\n \r\n \r\n \r\n \r\n
    The daily, 2009 S60 2.5T AWD, Ice White, Shark Stage 1.
    \r\nThe cruiser, 1972 164E, Alpine Blue Metallic.
    \r\n
    \r\n
    \r\nFor the most current photos of the day, find me on Instagram
    \r\n \r\n \r\n
    \r\n \r\n
    \r\n
    \r\n
    \r\n
    \r\n -' + '->\r\n
    \r\n \r\n \r\n \r\n \r\n \r\n Reply With Quote Reply With Quote \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n\r\n \r\n \r\n\r\n \r\n \r\n \r\n \r\n \r\n \r\n -' + '->\r\n
    \r\n
    \r\n
    \r\n
  • \r\n\r\n\r\n \r\n\n\n'; // next/previous post info pn[7339151] = "7371119,7339269"; pn[0] = ",7339151"; pn[7339269] = "7339151,7339273"; pn[7339273] = "7339269,7339279"; pn[7339279] = "7339273,7339349"; pn[7339349] = "7339279,7339493"; pn[7339493] = "7339349,7341229"; pn[7341229] = "7339493,7342141"; pn[7342141] = "7341229,7342351"; pn[7342351] = "7342141,7342629"; pn[7342629] = "7342351,7371119"; pn[7371119] = "7342629,7339151"; // cached usernames pu[0] = guestphrase; pu[35579] = "apico500"; pu[55110] = "142 Guy"; pu[302099] = "mathue"; pu[27652] = "spiked60"; // -->

    Threaded View

    Previous Post Previous Post   Next Post Next Post
    1. #1
      Junior Member
      Join Date
      Jan 2010
      Posts
      68

      window lift rail channel replacement

      I bought from VP new window lift rail channels and rubber strips to replace my rusty ones in my 142. I removed the old ones but the new one fits very loosely and wont hold the window. is there something else I need to do? I think the rubber strip may be too thin. Thank you
      Last edited by apico500; 06-14-2019 at 10:31 AM.

    Similar Threads

    1. 2013 Radiator Replacement - question on replacement part compatibility
      By generic_volvo_driver in forum XC90 (2003 - 2014)
      Replies: 2
      Last Post: 12-15-2017, 12:14 AM
    2. Engine Pad Replacement/Engine Torque Strut Mount Replacement
      By skifreak85353 in forum XC90 (2003 - 2014)
      Replies: 2
      Last Post: 11-22-2016, 02:23 PM
    3. DEM code calling for replacement AOD pressure sensor replacement
      By Captn' Haddock in forum R Forum (2004-2007)
      Replies: 12
      Last Post: 03-28-2014, 05:47 PM
    4. Dodge Tomahawk - Streaming Video
      By spokanite69 in forum Car Lounge
      Replies: 6
      Last Post: 03-12-2003, 06:09 PM
    5. s wondering if these oem replacement rotors Brembo OEM replacement rotors
      By volvos70turbo in forum S70, V70 & V70XC (1998-2000)
      Replies: 1
      Last Post: 11-22-2002, 12:50 AM