I recently picked up an M66 for my 2000 V70R, and I have a couple questions about this swap as I gather parts...
1- any input on what clutch disk to use? From what I understand, I can keep my 850R pressure plate (currently running an M56) and my single mass flywheel. I read something about needing to modify the disk somehow, but no details.
2- clutch line... will the internal slave P80 clutch line (9181324) work with the P2R M66?
3- anyone know where to get Hussein Holland's P80 M66 side mount bracket these days? Last I heard, Re-Volv had the design, but I haven't seen anything. I'll look into this as well, but it couldn't hurt to ask!
4- Now the fun stuff... angle gears. I read the AWD component thread on here, so I know which passenger side axle I'll need if I use a 2000 angle gear, but I never had an angle gear or driveshaft for my car. From what I understand, I can use the '99 version if I wanted, but the downpipe will need to be modified. Is there anything else that will need to be changed?
Also, is the '99 version any weaker than the 2000? Ideally, I'll find a 2000 XC to get these parts from, but worst case, I'll have to get the parts from a '99.
The other option is an S60R angle gear I have access to... will that work on a P80? I haven't found much info on that.
I'm sure there are other things I'm forgetting, but these are the main things I wanted to clarify as I gather parts.