SwedeSpeed - Volvo Performance Forum banner

940 300HP Drift Car

2K views 1 reply 2 participants last post by  Big Mike 940 
#1 ·
Hey guys.

So for the last 17 months I've been building my '91 940 into a drift car.
(You can watch my "build series" here: )
I swapped a B230FK in it, got the drivetrain almost complete and soon it will be time for the suspension.

I've already installed rear Bilstein B8's and for now the plan is to put e46 coilovers in the front and change most of the bushings for Polyurethane.
Do you have any advice on what else to do with the suspension? Also I will put double swaybars in the rear but probably not in the front because of wheel clearance.
Any advice would be much appreciated.
Thanks
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top